Congratulations on your purchase of the Smart Wine Decanter and Whisky Aerator! This guide will walk you through the steps to replace the adapter for the first time.

Step-by-Step Instructions

 

baluwa_adapter_replacement

 

Step 1: Remove the Bottom Cover

  • Rotate the bottom cover counterclockwise to remove it.
  • Hold the main body firmly while turning the bottom cover to avoid any slips.

Step 2: Take Out the Existing Adapter

  • Gently pull out the existing adapter from its slot.
  • Keep the removed adapter in a safe place in case you need to switch back to it.

Step 3: Test the Adapter for Fit

  • Test the new adapter by placing it on the mouth of your bottle.
  • If the adapter fits snugly without being too tight, it's the right size.
  • If the adapter is too tight, it could be difficult to install.
  • If the adapter is too loose, it won't create a proper seal.
  • If the fit is not perfect, try another adapter until you find the right one.

Step 4: Tighten the Bottom Cover

  • After placing the correct adapter, tighten the bottom cover by rotating it clockwise.
  • Ensure the bottom cover is securely fastened to avoid leaks.

Step 5: Connect the Telescoping Tube

  • Attach the telescoping tube to the adapter.
  • Make sure the connection is firm and the tube extends smoothly for efficient dispensing.

Step 6: Install on the Bottle for Use

  • Place the device on the bottle and ensure it is securely fitted.
  • Double-check that the device is stable on the bottle to prevent spills.

You're Ready to Enjoy!

With the adapter replaced and your Smart Wine Decanter and Whisky Aerator properly installed, you can now enjoy perfectly aerated wine or whisky, dispensed in exact amounts.

If you encounter any issues or need further assistance, please refer to the user manual or contact our customer support at support@baluwa.com. Cheers!